How to Make a Gravel Screen？

Making a gravel screen involves creating a simple frame and attaching a piece of wire mesh or hardware cloth to it. Here are the steps to follow:

Cut four pieces of 2x4 lumber to the desired length of your screen. These will be used as the frame for your screen.

Use screws or nails to attach the four pieces of lumber together to create a rectangular frame.

Cut a piece of wire mesh or hardware cloth to fit the size of your frame.

Use staples or screws to attach the wire mesh to the frame. Make sure to stretch the mesh tight so that it's taut and doesn't sag.

Attach handles to the top of the frame using screws or bolts. This will make it easier to lift and move the screen.

Optional: You can add legs to the bottom of the frame to raise it off the ground if you plan to use it for a longer period.

Your gravel screen for sale is now ready to use. Simply shovel the gravel onto the screen and shake it to allow smaller particles to fall through the mesh while larger ones remain on top.

How to screen gravel？

To screen gravel, you can use a gravel screen, also known as a gravel sieve or a gravel sifter. Here are the steps to follow:

Set up the gravel screen in a stable position, either by placing it on a level surface or attaching it to a frame with legs.

Shovel the gravel onto the screen, filling it up to a depth of about 2-3 inches.

Hold the screen at a slight angle, so that the gravel starts to slide down the screen.

Shake the screen gently back and forth, so that the smaller particles fall through the mesh or holes in the screen.

Continue shaking the screen until only the larger rocks and debris are left on top.

Remove the remaining gravel from the screen and repeat the process as necessary.

Optional: You can use different size screens to sort the gravel into different grades or sizes.

By using a gravel screen, you can quickly and efficiently separate the smaller particles from the larger ones, making it easier to use and transport the gravel.

How to screen dirt from gravel？

Screening dirt from gravel involves using a combination of shaking and sifting techniques to separate the two materials. Here are the steps to follow:

Set up a gravel screen in a stable position, either by placing it on a level surface or attaching it to a frame with legs.

Shovel the mixed dirt and gravel onto the screen, filling it up to a depth of about 2-3 inches.

Hold the screen at a slight angle, so that the mixture starts to slide down the screen.

Shake the screen gently back and forth, so that the smaller particles of dirt fall through the mesh or holes in the screen.

Use your hands or a small brush to help loosen any dirt that may be stuck to the gravel.

Remove the remaining gravel from the screen and repeat the process as necessary.

Optional: You can use different size screens to sort the gravel into different grades or sizes.

By using a gravel screen and shaking it gently, you can separate the dirt from the gravel quickly and efficiently, making it easier to use and transport the gravel.

Learn more about screen mesh suppliers Apscreen:

You may also be interested in Polyurethane screen mesh, Heavy duty wire mesh screen, Self cleaning mesh, Square weave wire mesh, etc.